Futuristic Fold-Unfold, Multistorey and Height Adjustment Based Flying Machines

Design Statement:
Vehicle can run on the road, hover and fly in the air.

Design has following parts:
Seating, Payload, Extended Portion and Impeller cabins or compartments, fold-able wings that mounted at the sides of vehicles body (in option).
Rotary seats and payload capsules.
Impeller, perforated sheet for air entrance, airfoil shaped flaps.
Landing gear and powered wheels.

Vehicle can run on the road, hover and fly in the air.
Futuristic Fold-Unfold, Multistorey and Height Adjustment Based Flying Machines

Working Steps:

Step 1: Vehicle is running on the road by engine driven powered wheel propulsion.

Step 2: Propulsion and lift force generated from high speed air jet that is being developed by propeller engine or jet engine is assisting in take-off the vehicle. Vehicle’s main body tilting position and airfoil shaped flaps (mounted inside the compartment-2) degree of rotation is controlling the Angle of Attack (AOA).
Vertical take-off and landing (VTOL) is possible by reversing the impeller rotation direction. 

Step 3: After take-off, lift force and thrust force generated from propeller engine or jet engine, airfoil shaped vehicle’s body, airfoil flaps in compartment-2 and fold-able wings that are mounted at the sides of vehicles body (in option) will complete the journey of travel.

Features:

  1. Vertical take-off and landing (VTOL).
  2. Vehicle can fold and unfold itself.
  3. Seating and payload arrangement in multi-storey compartments.
  4. Compact and lightweight design.
  5. Height adjustment ability to overtake and to overpass the other vehicles or obstructions in the path while travelling.
  6. Vehicle can travel on road and fly in the air.
  7. Combined features of car, hovercraft and airplane.
  8. Electric Powered/ Renewable energy dependence.
  9. Tilt to an angle.
  10. Have rotary seats and payload capsules to remain always aligned.
  11. Fast and reliable journey experience.
  12. Can drive across varied height tunnels by height adjustment.
  13. Easy take-off and landing.

Cyclic Wind & Water Powered Turbine and Machine

Water wave energy and wind energy are types of sustainable energy resources.
To use these enormous energy resources this turbine design has been developed.

 

Two different types of wings (according to airfoil shape) that are mounted opposite to each other generates the upward and downward lift force respectively as the flow of air or fluid passes over them.

Design Statement: 
Design has following parts:
1. Wings (two or more in quantity to generate required magnitude of upward and downward lift)
2. Flywheel
3. Supporting rod
4. Bearing to rotate the whole turbine about the axis of support to accommodate the influence of fluid flow direction.
The wings are connected to the flywheel with the help of links/connecting rods that are hinged on central support to assist the wing’s upward and downward motion that came result into the effect of aerodynamic or flowing fluid forces.

Working: Two different types of wings (according to airfoil shape) that are mounted opposite to each other generates the upward and downward lift force respectively as the flow of air or fluid passes over them. The net effect of generated lift forces will tend to rotate the flywheel in CCW direction. As the flywheel rotates it removes the fluctuation in output energy cycle. The output mechanical energy from flywheel shaft can be used to rotate the electric generators or machines.

Electromagnetic Propulsion Elevated Transportation System

Design Statement: 

Vehicle is mounted/hanging on the elevated pipe or rail track with the help of height adjustment and shock absorber link. The wheel on rail track has the power from internal drive and can rotate freely by actuating the clutch.

Transportation System
Electromagnetic Propulsion Elevated Transportation System
  1. Electromagnets are mounted on the both side of vehicle and guided pipes to generate the lift and propulsion by EDS propulsion technology.
  2. Speed and motion of the vehicle is controlled by adjusting the magnitude of electromagnetic force and synchronous frequency between vehicle’s and guided pipe’s electromagnetic coils.
  3. To get the information about which coil is active or where is the position of vehicle electromagnetic coils are covered with colorful led lights.
  4. Vehicle can travel separately or in the form of long train.
  5. Vehicle is all electric powered.
  6. The transportation system is computer controlled.

Working:

Vehicle's propulsion
Magnetic attraction and repulsion forces are responsible to drive the vehicle

The diagram is describing the working of EDS propulsion technology. Magnetic attraction and repulsion forces are responsible to drive the vehicles.

Solved! Windows Setup Error “We Couldn’t Create a New Partition (Error-0xbb103460)”

Have you bought a new PC or Hard disk drive and getting the error “We Couldn’t Create a New Partition (Error-0xbb103460)” during Windows 10 installation?

Partition creation error
Windows setup error “we couldn’t create a new partition”

To overcome the aforementioned problem, first of all try one of the solution described below.

Steps:

  1. Shut down the PC.
  2. Eject the media from which you are installing the Windows 10.
  3. Insert the other version of windows disk image media like Windows 8/8.1/7.
  4. Proceed the steps to create the partition.
  5. After creating the partition successfully, cancel the installation process, shut down the PC and eject the windows installation media.
  6. Insert the Windows 10 disc image media and start the installation process.
  7. Complete the installation.
    “Solved”.

Author: Rajiv Sharma,
Creative Engineer, Researcher, Innovator and Designer at mechscinovate

Is There Any Strategy Available For A Most Efficient or Most Eligible Candidate To Make Him/Her Enter In An Opportunity By Considering Equivalent or Bypassing The Exams?

Unfortunately, The answer is ‘No’!

Major flaw in higher education entrance and recruitment policy in public sector.
Because most of the recruiters/ evaluators don’t know the purpose of the entrance exam!

Unfortunately, The answer is ‘No’ at present!

Consider that you are one of the most energetic, excellent, revolutionary and a young innovator/scientist/researcher or professional in India and at the same time recruiters/evaluators discards you to accept as an engineer or professional because you have not cleared their particular designed exam even though if you are great on required skills.

  1. Your friends who were average or low in studies, rote the books and now are called as engineers, scientists, designers and researchers.
  2. You who was excellent in studies, invested time to explore the subjects, thought out of the box and developed creative designs, research & innovations is now begging for an opportunity in relevant area of interest in which you are one of the most eligible but are helpless to attend or pass the entrance exam by any reason.
(please don't look for the reasons at this time, consider the case)

It all will result in that one day you will be helpless to vanish your skills.

And it is the reason for that Why and How most Innovators, Scientists, Researchers or Professionals are being badly treating in India or anywhere else in the world.

To overcome this problem, To stop biased recruitment and To improve skills, there is need to renew the policy or to make a strategy by answering the below mentioned question.

Is There Any Strategy Available For An Efficient or Most Eligible Candidate To Make Him/Her Enter In An Opportunity By Considering Equivalent or Bypassing Entrance Exams In India or anywhere else the world?

 

please share your thoughts in comments and make it possible to reach this post to its destination.


 

“Is There Any Strategy Available For An Efficient or Most Eligible Candidate To Make Him/Her Enter In An Opportunity By Considering Equivalent or Bypassing Entrance Exams In India?”

Unfortunately, The answer is ‘No’!

Major flaw in Indian higher education entrance and recruitment entrance strategy in PSUs.

Because most of the recruiters/ evaluators don’t know the purpose of the entrance exam!

Unfortunately, The answer is “No” at present

Consider that you are one of the most energetic, excellent, revolutionary and a young innovator/scientist/researcher or professional in India and at the same time recruiters/evaluators discards you to accept as an engineer or professional because you have not cleared their particular designed exam even though if you are great on required skills.

  1. Your friends who were average or low in studies, rote the books and now are called as engineers, scientists, designers and researchers.
  2. You who was excellent in studies, invested time to explore the subjects, thought out of the box and developed creative designs, research & innovations is now begging for an opportunity in relevant area of interest in which you are one of the most eligible but are helpless to attend or pass the entrance exam by any reason.
(please don't look for the reasons at this time, consider the case)

It all will result in that one day you will be helpless to vanish your skills or otherwise you will be imported by any other country.

And it is the reason for that Why and How most Innovators, Scientists, Researchers or Professionals are being badly treating in India.

To overcome this problem, To save Brain-Drain, To stop biased recruitment and To improve skills, there is need to renew the policy or to make a strategy by answering the below mentioned question.

“Is There Any Strategy Available For An Efficient or Most Eligible Candidate To Make Him/Her Enter In An Opportunity By Considering Equivalent or Bypassing Entrance Exams In India?’

 

please share your thoughts in comments and make it possible to reach this post to its destination.

Thank-you,

Rajiv Sharma,

Founder at RESEARCH & ME_mechscinovate


Overhead Solar-Powered Fully Automated Driver-Less Public Transportation Vehicles

Abstract
Mostly electric, solar and renewable energy powered transportation systems are clean and green for natural environment.
The idea shows smart futuristic, public or private owned and lightweight vehicles. These vehicles are fully automated, controlled via computers from stations, required lightweight structure for support, low investments and featured with luxury ride.
These transportation systems also possessed flexible path, vacant seats, secured, lowest cost, luxurious look, less dense, lowest in maintenance and shared between all the public features.

Qualified in Tech Briefs @NASA ‘Create The Future Design Contest 2016’

Overhead Solar-Powered Fully Automated Driver-Less Public Transportation Vehicles
Overhead Solar-Powered Fully Automated Driver-Less Public Transportation Vehicles

Types
Two transportation systems types shown in images:
1. Motorbike Public Transpiration.
Electric Motorbikes are covered with cabin and has entrance – exit at rear or at sides.
2. Automated Futuristic Light Weight Car with Detachable Roof Public Transportation. Please click to view
These vehicles have solar panels integrated in their detachable roof.

Parts
Common Parts of both transportation systems are:
1. Single or multiple Vehicles linked like railway or independent to each other.
2. Track lines in the air.
3. Covered path (optional).
4. Computer controlled (Electric powered like railway, other renewable energy source is in option).
5. Vacant Seats featured seats for real-time data of seat availability (optional).
6. Battery packs (optional).
7. App supported, GPS enabled Smartphone for call-in the vehicle and geographic location, travel distance units counting (optional).
8. Cloud computing medium connected to computer app, watch app and smartphone app for storage and exchange of recorded data or status from this transportation system (optional).

Note: Beneath the tracks, roads are made for general vehicles. Tracks are able to be customized in every direction in any time because of Lego type joint configuration.